What are the Different Types of Pallet Racking?

Different Types of Pallet Racking

Pallet racking is a material handling storage aid system. It is used to store materials on pallets. There are many different kinds of pallet racking. All types allow for multiple levels and horizontal rows. However, there are a few key differences between the different types. If you’re looking to store materials on a pallet in your warehouse, you should choose the right type of rigging for the job. Listed below are some of the advantages and disadvantages of each type.

Push back racking:

This racking system gets its name from its design: the pallet at the front pushes backward to make way for the next one. This style of racking is great for using the Last In, First Out inventory. Double lanes are also common, which allow for more storage space without requiring too many aisles. This type of rigging system is best for warehouses that have a lot of pallets.

Egress Distance:

The egress distance is important when selecting a racking system. A building’s column spacing and egress distance are the determining factors. If your rack is too far from these locations, you may have to move them out of the way. Alternatively, if you have a crowded warehouse, you can install fewer rows to accommodate a larger pallet rack. If you don’t plan on expanding your warehouse, you should consider purchasing a modular rack to add extra shelves.

To determine the capacity of the pallet racking system

consider the weight limit. There are several ways to calculate how much your racking system can support. For example, if you want to increase your space, you can add more racks to a rack if you have fewer rows. But if you need more space, you can simply remove a shelf. That’s all. But if you need to install a lot more racks, you might have to rework the layout of your warehouse.

Before constructing a pallet racking system

it’s important to measure the space and beams in the warehouse. Then, you can choose between a single- or double-wide system. Depending on the size of the rack, you may even need more than one pallet. Therefore, you should consider the weight limit before purchasing a racking system. If you don’t have the space, you can build more pallets.

Aside from weight capacity

the racks must also withstand the weight of pallets. The weight limit can be set according to the load. The weight limit should be no more than five kilograms. The weight of the pallets should be evenly distributed among the racks. The racks should have sufficient clearances to accommodate the load. The height of the uprights must also be measured following the space in the warehouse.

Leave a Comment

Your email address will not be published. Required fields are marked *